 |
 |
 |
|
 |
|
 |
   |
||
 |
Hitachi Power Tools
Hitachi tools are equipped with the latest design in safety and efficiency. Bianco hold a wide variety tools including demolition hammer drills, cordless drills, impact drivers, circular saws, nails guns and any other Hitachi tools you may require.
Product guide (PDF - 1.49MB) 125mm Angle Grinder G13SE2 (210121)
A selection of cutting and grinding discs is available for this grinder.
A selection of cutting and grinding discs is available for this grinder. 18v Cordless Impact Wrench WR18DL(HD) (210614) |
| Capacity Bolt | 10-16mm (3/8-5/8") |
| Capacity High Tension | 8-14mm (5/16-9/16") |
| Battery | 18v, 3.0Ah Li-ion |
| Battery Warranty | 12 Months (Conditions Apply) |
| No Load Speed | 0-2,600rpm |
| Length | 167mm |
| Weight | 1.6kg |
| Impact Rate | 0-3,200 bpm |
| Drive | 1/2" square |
| Troque | 220Nm |
| Standard Accessories | Cooling charger, 2 batteries, carry case |
18v Cordless Impact Driver WH18DL(HD) (210613)
- New Lithium Iron battery (lightweight, long life and compatible)
- Powerful 150Nm of torque
- Comfortable non slip grip handle
- 2 step action switch lever (power mode/save mode)
- Convenient belt hook with LED light
- Same torque at reverse rotation
- Compatible with all existing Hitachi 18v batteries
- Approximately 45 minutes charging time
- Also available naked (WH18DL(N)
Specifications
| Capacity Bolt | 6-14mm (1/4-9/16") |
| Capacity High Tension | 6-12mm (1/4-15/32") |
| Capacity Mach Screw | 4-10mm (5/32-5/8") |
| Battery | 18v, 3.0Ah Li-ion |
| Battery Warranty | 12 Months (Conditions Apply) |
| No Load Speed | 0-2,600rpm |
| Length | 162mm |
| Weight | 1.6kg |
| Impact Rate | 0-3,200 bpm |
| Drive | 1/4" hex |
| Troque | 150Nm |
| Standard Accessories | Cooling charger, 2 batteries, carry case |
14.4v Cordless Impact Driver WH14DL(HD) (213036)
- New Lithium Iron battery (lightweight, long life and compatible)
- Powerful 140Nm of torque
- Comfortable non slip grip handle
- 2 step action switch lever (power mode/save mode)
- Convenient belt hook with LED light
- Same torque at reverse rotation
- Compatible with all existing Hitachi 14.4v batteries
- Approximately 45 minutes charging time
Specifications
| Capacity Bolt | 6-14mm (1/4-9/16") |
| Capacity High Tension | 6-12mm (1/4-15/32") |
| Capacity Mach Screw | 4-10mm (5/32-5/8") |
| Battery | 14.4v, 3.0Ah Li-ion |
| Battery Warranty | 12 Months (Conditions Apply) |
| No Load Speed | 0-2,600rpm |
| Length | 162mm |
| Weight | 1.5kg |
| Impact Rate | 0-3,200 bpm |
| Drive | 1/4" hex |
| Troque | 140Nm |
| Standard Accessories | Cooling charger, 2 batteries, carry case |
20mm Impact Drill DV20VB2 (210489)
- Synchronised gear shift mechanism
- Easy to use mode switching
- Easy to handle large trigger
- Variable speed and reverse
- 13mm (1/2")
Specifications
| Capacity Wood | 40mm (1-1/2") |
| Capacity Concrete | 20mm (3/4") |
| No Load Speed | 0-1000/0-3000 |
| Chuck | 13mm |
| Length | 340/350mm |
| Weight | 2.2kg |
| Impact Rate | 8000/26000bpm |
| Brush | 999041 |
| Power Input | 790 watts |
| Standard Accessories | Chuck key, side handle, depth stop, carry case |
Circular Saw C7MFA 190mm (210619)
- Accurate and sturdy die-cast aluminium base
- Base provided with parallel adjustment
- High performance 40 tooth 190mm blade
Specifications
| No load speed | 5,500rpm |
| Length | 291mm |
| Weight | 3.6kg |
| Blade Diameter | 190mm |
| Power Input | 1,010 watts |
| 90 Degrees Cut Depth | 0-68mm |
| 45 degrees Cut Depth | 48mm |
| Standard Accessories | Blade, wrench, parallel guide, hex key |
Circular Saw C7YA(FCB) 185mm (210507)
- dustless operation when used with appropriate accessories
- powerful industrial 1400 watt motor
- 4-Tooth diamond tipped fibre-cement blade
- Specifically built for cutting fibre cement sheets.
Specifications
| No Load Speed | 5,500rpm |
| Length | 294mm |
| Weight | 5.1kg |
| Brush | 999038 |
| Blade Diameter | 185mm (7-1/4") |
| Power Input | 1,400 watts |
| 90 Degrees Cut Depth | 60mm (2-3/8") |
| 45 Degrees Cut Depth | 47mm (1-27/32") |
| Blade Bore | 20mm |
| Standard Accessories | Fibre cement blade, deflector, dust bag, spanner |
Demolition Non-Rotary Hammer H65SB2 (210542)
- low noise and vibration levels
- triple dust sealed, double insulated design
- comfortable shock absorbing handles
- high impact energy: 40 joules
- 1400 watt motor.
A selection of accessories is available for this demolition hammer.
More (PDF - 1.49MB)
Heavy Duty Fibreshears 534556 (210569)
The Hitachi heavy duty fibreshears is powered by the Hitachi 'DUT 10' drill for effortless cutting of hardiflex, villaboard and hardiplank. It eliminates dust problems caused by other cutting methods and comes supplied with Tungsten blades.
(Reproduced with permission of Hitachi Australia Pty Ltd, Product guide 2005/2006)
Designed to cut:
| Cermaic Tile Underlay | 6MM | Paneclad Sheets | 6MM |
| Hardbrace Sheet Bracing | 5MM | Pineridge Lining | 6MM |
| Hardiflex Sheets | 4.5 & 6MM | Primelime Weatherboards | 9MM |
| Hardiglaze Swirl | 6MM | Shingled Siding | 6MM |
| Hardiscreen Lattice | 6MM | Versilux Lining | 4.5 & 6MM |
| Hardiplank Cladding | 7.5MM | Villaboard Lining | 6MM |
| Harditex Base Sheets | 7.5MM | Vinyl & Cork Underlay | 5MM |
Hitachi RP30Y vacuum cleaner (210300)
- automatic switch outlet for ease of use
- suitable for wet & dry operation
- durable stainless steel casing
- heavy duty 1,200 watt motor
- integrated accessory stands
C6MFA - 165mm Circular Saw (210082)
- Accurate and strudy die-cast aluminium base
- Base provided with parallel adjustment
- High performance 40 tooth 165mm blade
Specifications
| No. Load Speed | 5,500 rpm |
| Length | 276mm |
| Weight | 3.4kg |
| Blade Diameter | 165mm |
| Power Input | 1,010 watts |
| 90 Degrees Cut Depth | 0 - 57mm |
| 45 Degrees Cut Depth | 38mm |
| Standard Accessories | Blade, wrench, parallel guide. Hex key |
NR 90AD Nailgun 1st Fix (210206)
- Revolutionary lightweight & compact design
- Well balanced clip head nailer
- Rear load magazine with by pass follower
- Tool-less depth adjustment
- Dual function trigger (bump/single shot)
- Moulded rubber grip for comfortable handling
Specifications
| Weight | 3.2kg |
| Pressure Range (gauge) | 5-8.5kg/cm2(70 - 120 psi) |
| Nail Capacity | 86 - 94 nails |
| Nail size | Length 50 - 90mm |
| Dimensions | 467 x 322mm |
| Standard Accessories | Standard goggles |
Nailgun Da Brad 65mm NT65MA3 (211479)
- Unique on-board blower feature
- 360 degree adjustable exhaust
- Lightweight and high power
- Tool-less depth adjustment
- Dual function trigger
- Quick clear feature
- Applications: Architraves, skirting, door jambs, cabinet making, window manufacturing,flooring, panelling, and final fix out in building construction
Specifications
| Weight | 2.0kg |
| Pressure Range (gauge) | 70 - 120 psi |
| Nail Capacity | 100 nails |
| Nail size | Fastener Series DA Series Brads 32 - 65mm length |
| Dimensions | 343mm x 305mm (L x H) |
| Standard Accessories | Nose protector,eye shields, carry case |
| Capacity Solid | 22L |
| Capacity Liquid | 24L |
| Weight | 9.8kg |
| Brush | 999021 |
| Power Input | 1,200 watts |
| Auto Outlet | 40-2,000 watts |
| Static Pressure | 200 mbar |
| Blow Volume | 3m³/min |
| Dimensions | 400 x 400 x 715mm |
| Standard Accessories | hose (3m) |
 |
| Conversion Calculator >> |
 |
